Release Notes: This version adds support for the Atmel SAM4S Xplained Pro board, for the SAMA5D3 Xplained board, and for the STMicro Nucleo F401RE board. Also included are RTC, watchdog, and HSMCI for the SAM4S, an NTP client, and extensions for the ZiLOG ZNEO.
Release Notes: New logic built into the RTOS to support monitoring of CPU usage by each thread. New board support for the Atmel SAM4E-EK, Atmel SAM D20 Xplained Pro, and TI TMS4C123G Launchpad. Several new drivers and important bugfixes. The NuttShell (NSH) now supports an Emacs-like command line editor.
Release Notes: Features include: Allwinner A10 in the pcDuino v1 board, STM32VL-Discovery board, PX4FMU v2, and the Toyaga 16Z ZNEO board. ARMv7-M support for high priority, nested interrupts. Extended networking fetures: SO_LINGER socket option and TCP write buffering support. New drivers: OV2640 Camera Driver; Sharp Memory LCD. Restructuring of the graphics subsystem to support kernel build modes. NSH command line extensions for greater bash compatibility, including looping and backquoted commands. Other new applications include an .ini file parser and a tiny vi-like editor.
Release Notes: This release features NAND support and architecture support for the STMicro STM32F429 and the Ateml SAM4E. New boards supported in this release include the STM32F439I-Discovery with LCDC and OTG HS (in FS mode), the Viewtool STM32F103/F107 board, and the Olimex LPC_H3131 with EHCI-based USB host support. Board was also extended for the Spark, the SAMA5D3x-EK PWM, I2S, and NAND support, and for the Freedom-KL25Z with PWM. This release also includes the beginning of a new procfs/ file system.
Release Notes: A new audio subsystem includes graphical and command line media players and a VS1053 audio CODE driver. Additional Atmel SAMA5D3x drivers: Ethernet (bot EMAC and EMAC), RTC, /dev/random, watchdog, timer/counter, ADC, touchscreen, LCD, and CAN. Support for the Olimex STM32 P207 board, the Spark core, and the Motorola C139 phone.
Release Notes: This release includes extensive new support for the Atmel SAMA5 chips: DMA, SPI, high speed SD card drivers, PIO interrupts, USB host (both OHCI and EHCI), high speed USB device, Two Wire interface (TWI), and SDRAM. New networking features include drivers for the Microchip ENCX24J600 and for the TI CC3000 wireless module. Board support for the LeafLabs Maple and Maple Mini boards was also contributed.
Release Notes: New board support: Atmel SAMAD5D3x-EK and Arduino Due. Extended board support: SAM4L Xplained I/O1, LCD1, and OLED1 modules; SAM4S Xplained on-board 1MB SRAM; SAM3U-EK Touchscreen. Freedom KL25Z SDI and TSI. New applications: Zmodem file transfers.
Release Notes: A new SMART FLASH file system, new drivers for segment LCDs, wireless modules, and LCDs, and support for lots of new boards: Atmel SAM4L Xplained Pro, Atmel SAM4L Xplained, MikroElektronika Mikromedia for STM32F4, the STMicro STM32L-Discovery, the STM32 Tiny boar, and the Pirelli DP-L10 phone.
Release Notes: This release adds verified kernel build support. In this (optional) buildmode, NuttX is built as a monolithic kernel. NuttX is built as a separate kernel mode "blob", and the applications are built as a separate user mode "blob". Extended platform support includes support for the WaveShare Open1788 (NXP LPC1788) with the LCD frame-buffer driver, SDRAM, and DMA SD card support, and support for the Kinetis L Cortex-M0+ family and a (minimal) port for the Freedom KL25Z board. Architecture support for the STMicro STM32F4727/737 has been added.
Release Notes: This release adds support for the Cortex-M0 family, and for the nuvonTon NuTiny-SDK-NUC120 in particular. The STM32 support has been extended to include the F3 family and the STM32F3discovery board. Also included is support for the Cortex-M3 LPC1788 and WaveShare Open1788 board.