200 projects tagged "Boot"

Download No website Updated 06 Jun 2004 cfgsh

Screenshot
Pop 48.87
Vit 1.52

cfgsh is a configuration shell utility that is intended to be used for configuring embedded systems. It is meant to replace the normal combination of utilities including ifconfig, route, startup scripts, and configuration files with a single program that implements the same functionality in a manner more consistent with the embedded system world.

Download Website Updated 13 May 2004 Symbion Daemon Tool

Screenshot
Pop 45.52
Vit 1.75

Symbion Daemon Tool is a daemon master tool. It runs and monitors other daemons and restarts them when necessary.

Download Website Updated 09 Apr 2004 Enforcer

Screenshot
Pop 41.23
Vit 1.78

Enforcer is a Linux security module designed to help improve integrity of a computer running Linux. The Enforcer provides a subset of Tripwire-like functionality. It runs continuously and as each protected file is opened its SHA1 is calculated and compared to a previously stored value. The Enforcer is designed to integrate with TCPA hardware to provide a secure boot when booted with a TCPA enabled boot loader. TCPA hardware can protect secrets and other sensitive data (for example, the secrets for an encrypted loopback file system) and bind those secrets to specific software.

Download Website Updated 05 Apr 2004 sysv-rc-conf

Screenshot
Pop 20.49
Vit 60.86

sysv-rc-conf gives administrators an easy-to-use curses interface for managing /etc/rc{runlevel}.d/ symlinks. The interface comes in two different flavors, one that simply allows turning services on or off and another that allows for more fine tuned management of the symlinks. It's a replacement for programs like ntsysv or rcconf.

Download Website Updated 29 Mar 2004 inAccess Networks JTAG tools

Screenshot
Pop 38.77
Vit 1.00

inAccess Networks JTAG tools is a collection of code and a set of tools for using the JTAG interface (present in most modern microprocessors) to perform hardware tests, and for programming Flash Memory Devices connected to the processor's bus. It is especially useful for performing initial hardware tests and for bootstrapping prototype systems. It runs on a "host system" (e.g., a desktop computer with Linux) and accesses the "target system" (e.g., the embedded system's CPU board) through a simple five-line hardware interface. The host system's parallel port is used as the hardware interface, though other arrangements can be supported very easily. It is quite modular and though it currently supports the Intel StrongARM SA-1110, the Intel PXA255, and the Intel StrataFlash ICs, it can be easily extended to support other target hardware configurations by writing simple modules.

Download Website Updated 20 Mar 2004 GrubConf

Screenshot
Pop 81.33
Vit 2.79

GrubConf is a graphical GRUB configuration editor. It provides an easy to use interface allowing effortless modification of OSes and the flexibility to configure the most obscure options. It is designed to require minimal user interaction while providing tools for the most adventurous user.

Download No website Updated 20 Mar 2004 Advanced TFTP

Screenshot
Pop 346.34
Vit 3.29

atftp is a client/server implementation of the TFTP protocol that implements RFCs 1350, 2090, 2347, 2348, and 2349. The server is multi-threaded and the client presents a friendly interface using libreadline. The current server implementation lacks IPv6 support.

Download Website Updated 10 Mar 2004 elilo

Screenshot
Pop 28.35
Vit 1.00

elilo is a bootloader for EFI machines. It supports flexible local booting from a FAT 32 filesystem, and also supports a wide variety of boot options via network booting over DHCP/TFTP.

Download Website Updated 25 Jan 2004 ethwireck

Screenshot
Pop 56.87
Vit 1.00

ethwireck can detect if the physical layer of the Ethernet is up. Laptops which use dynamic IP address assignment via DHCP have the problem that the boot process is much longer when no wire is connected to the Ethernet card. This is because the startup scripts have to wait for the DHCP request to time out. ethwireck can be used in the init script for your network card to determine whether or not an interface should be brought up. In other words, a timeout is avoided.

Download Website Updated 23 Dec 2003 Injector Linux

Screenshot
Pop 60.46
Vit 1.00

Injector Linux is a single-floppy Linux system, which supports many filesystems -- currently approximately 25. Because of its wide range of supported filesystems, it is very useful for disk rescue operations.

Screenshot

Project Spotlight

CloverETL

A Java framework for building data integration and ETL applications.

Screenshot

Project Spotlight

Ldap Synchronization Connector

An effective directory synchronization tool.